I have trouble with v3.4.2 & v3.4.1 and server DELL PowerEdge 2900. During installation step, can't select logical volume for installation created on raid controller " PERC 5/i integrated".
More over, version v3.3.1 installs fine on this server.
Firmware for server BIOS and firmware for RAID controller are updated already.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.12-61.1.9.el6uek.x86_64 (mockbuild@x86-ol6-builder-05) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #2 SMP Tue Sep 13 22:53:36 PDT 2016
[ 0.000000] Command line: initrd=/ubninit xen.gz dom0_mem=max:128G dom0_max_vcpus=20 --- vmlinuz --- initrd.img BOOT_IMAGE=/ubnkern
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfb4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfb50000-0x00000000cfb65fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfb66000-0x00000000cfb85bff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfb85c00-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. PowerEdge 2900/0TM757, BIOS 2.7.0 10/30/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CFC00000 mask FFFC00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 4608MB, range: 256MB, type WB
[ 0.000000] reg 5, base: 3324MB, range: 4MB, type UC
[ 0.000000] total RAM covered: 4092M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3324MB, range: 4MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[ 0.000000] e820: update [mem 0xcfc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfb50 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02097000, 0x02097fff] PGTABLE
[ 0.000000] BRK [0x02098000, 0x02098fff] PGTABLE
[ 0.000000] BRK [0x02099000, 0x02099fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x0209a000, 0x0209afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x12fdfffff]
[ 0.000000] [mem 0x120000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfb4ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcf9fffff] page 2M
[ 0.000000] [mem 0xcfa00000-0xcfb4ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x7cfe9000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2160 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000000F21FC 000084 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 0x00000000CFB83524 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 0x00000000CFB66000 004996 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000CFB85C00 000040
[ 0.000000] ACPI: FACS 0x00000000CFB85C00 000040
[ 0.000000] ACPI: APIC 0x00000000CFB83078 0000AA (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 0x00000000CFB83130 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFB83184 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 0x00000000CFB831C0 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 0x00000000CFB83200 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000CFB83338 000176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 0x00000000CFB6AB18 000210 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 0x00000000CFB6AD28 00027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 0x00000000CFB6A998 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 0x00000000CFB6A9C8 000150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 0x00000000CFB834BC 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12ffd5000-0x12fffbfff]
[ 0.000000] cma: Reserved 16 MiB at 0x000000012ec00000
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a400000-ffff88012e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfb4ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1047279
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13230 pages used for memmap
[ 0.000000] DMA32 zone: 846672 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec83000, GSI 128-151
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfb50000-0xcfb65fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfb66000-0xcfb84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfb85000-0xcfb85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfb86000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88012fc00000 s101016 r8192 d30056 u262144
[ 0.000000] pcpu-alloc: s101016 r8192 d30056 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/ubninit xen.gz dom0_mem=max:128G dom0_max_vcpus=20 --- vmlinuz --- initrd.img BOOT_IMAGE=/ubnkern
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3973292K/4189116K available (6977K kernel code, 1546K rwdata, 3740K rodata, 1796K init, 2876K bss, 199440K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:524544 nr_irqs:2048 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.523 MHz processor
[ 0.001019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.04 BogoMIPS (lpj=1596523)
[ 0.002005] pid_max: default: 32768 minimum: 301
[ 0.002198] ACPI: Core revision 20150410
[ 0.004880] ACPI: All ACPI Tables successfully acquired
[ 0.005042] Security Framework initialized
[ 0.005239] SELinux: Initializing.
[ 0.005431] SELinux: Starting in permissive mode
[ 0.006250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009238] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010709] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010918] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.011539] Initializing cgroup subsys blkio
[ 0.011727] Initializing cgroup subsys memory
[ 0.012022] Initializing cgroup subsys devices
[ 0.012208] Initializing cgroup subsys freezer
[ 0.012394] Initializing cgroup subsys net_cls
[ 0.012579] Initializing cgroup subsys perf_event
[ 0.012765] Initializing cgroup subsys net_prio
[ 0.012955] Initializing cgroup subsys hugetlb
[ 0.013042] CPU: Physical Processor ID: 0
[ 0.013224] CPU: Processor Core ID: 0
[ 0.013407] mce: CPU supports 6 MCE banks
[ 0.013598] CPU0: Thermal monitoring enabled (TM1)
[ 0.013784] process: using mwait in idle threads
[ 0.014010] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.014194] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.015109] Freeing SMP alternatives memory: 28K (ffffffff81dbf000 - ffffffff81dc6000)
[ 0.019006] ftrace: allocating 27880 entries in 109 pages
[ 0.031306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.042000] smpboot: CPU0: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (fam: 06, model: 0f, stepping: 07)
[ 0.042000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.042002] perf_event_intel: PEBS disabled due to CPU errata
[ 0.042188] ... version: 2
[ 0.042369] ... bit width: 40
[ 0.042550] ... generic registers: 2
[ 0.042731] ... value mask: 000000ffffffffff
[ 0.042914] ... max period: 000000007fffffff
[ 0.043002] ... fixed-purpose events: 3
[ 0.043183] ... event mask: 0000000700000003
[ 0.045166] x86: Booting SMP configuration:
[ 0.045349] .... node #0, CPUs: #1
[ 0.117288] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.118052] #2 #3 #4 #5 #6 #7
[ 0.192021] x86: Booted up 1 node, 8 CPUs
[ 0.193187] smpboot: Total of 8 processors activated (25543.64 BogoMIPS)
[ 0.196006] devtmpfs: initialized
[ 0.204008] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.204411] pinctrl core: initialized pinctrl subsystem
[ 0.205186] NET: Registered protocol family 16
[ 0.208009] cpuidle: using governor menu
[ 0.208295] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.208609] ACPI: bus type PCI registered
[ 0.208791] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.209141] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.209459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.210366] PCI: Using configuration type 1 for base access
[ 0.210553] PCI: Dell PowerEdge 2900 detected, enabling pci=bfsort.
[ 0.216116] ACPI: Added _OSI(Module Device)
[ 0.216289] ACPI: Added _OSI(Processor Device)
[ 0.217005] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.217188] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.219110] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.219494] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[ 0.219957] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88012e8ab488), AE_NOT_FOUND (20150410/psparse-536)
[ 0.220678] ACPI: Interpreter enabled
[ 0.220864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[ 0.221182] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.221594] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
[ 0.222015] ACPI: (supports S0 S4 S5)
[ 0.222196] ACPI: Using IOAPIC for interrupt routing
[ 0.223217] HEST: Table parsing has been initialized.
[ 0.223404] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.232950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.233010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.233474] acpi PNP0A08:00: PCIe AER handled by firmware
[ 0.234100] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.234415] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.235031] PCI host bridge to bus 0000:00
[ 0.235217] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.235403] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.235590] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.235777] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.236004] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff window]
[ 0.236318] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.236647] pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
[ 0.236713] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.236820] pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
[ 0.236875] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.237083] pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
[ 0.237138] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.237246] pci 0000:00:04.0: [8086:25e4] type 01 class 0x060400
[ 0.237301] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.237408] pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
[ 0.237461] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.237576] pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
[ 0.237630] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.237736] pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
[ 0.237789] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.237894] pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
[ 0.237910] pci 0000:00:08.0: reg 0x10: [mem 0xfc800400-0xfc8007ff 64bit]
[ 0.237963] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.238074] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
[ 0.238194] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
[ 0.238670] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
[ 0.238789] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
[ 0.238902] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
[ 0.239020] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
[ 0.239127] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
[ 0.239254] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
[ 0.239334] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.239455] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
[ 0.239503] pci 0000:00:1d.0: reg 0x20: [io 0xcce0-0xccff]
[ 0.239608] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
[ 0.239656] pci 0000:00:1d.1: reg 0x20: [io 0xccc0-0xccdf]
[ 0.239766] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
[ 0.239814] pci 0000:00:1d.2: reg 0x20: [io 0xcca0-0xccbf]
[ 0.239923] pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
[ 0.239971] pci 0000:00:1d.3: reg 0x20: [io 0xcc80-0xcc9f]
[ 0.240094] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
[ 0.240116] pci 0000:00:1d.7: reg 0x10: [mem 0xfc800000-0xfc8003ff]
[ 0.240205] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.240306] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.240451] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
[ 0.240632] pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
[ 0.240649] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.240660] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.240672] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.240683] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.240695] pci 0000:00:1f.1: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.240719] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.240907] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.241005] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.241193] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.242005] pci 0000:06:00.0: [8086:3500] type 01 class 0x060400
[ 0.244689] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.245551] pci 0000:06:00.3: [8086:350c] type 01 class 0x060400
[ 0.248321] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[ 0.251106] pci 0000:00:02.0: PCI bridge to [bus 06-0b]
[ 0.251295] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
[ 0.252643] pci 0000:07:00.0: [8086:3510] type 01 class 0x060400
[ 0.255597] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.256414] pci 0000:07:01.0: [8086:3514] type 01 class 0x060400
[ 0.259368] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[ 0.261230] pci 0000:06:00.0: PCI bridge to [bus 07-0a]
[ 0.261597] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.263184] pci 0000:08:00.0: [1166:0103] type 01 class 0x060400
[ 0.266138] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.267230] pci 0000:07:00.0: PCI bridge to [bus 08-09]
[ 0.267596] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.269046] pci 0000:09:00.0: [14e4:164c] type 00 class 0x020000
[ 0.269826] pci 0000:09:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.272780] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.274596] pci 0000:08:00.0: PCI bridge to [bus 09]
[ 0.275046] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.276597] pci 0000:07:01.0: PCI bridge to [bus 0a]
[ 0.280092] pci 0000:06:00.3: PCI bridge to [bus 0b]
[ 0.281107] pci 0000:00:03.0: PCI bridge to [bus 0c]
[ 0.281380] pci 0000:0d:00.0: [8086:105e] type 00 class 0x020000
[ 0.281399] pci 0000:0d:00.0: reg 0x10: [mem 0xfc3e0000-0xfc3fffff]
[ 0.281411] pci 0000:0d:00.0: reg 0x14: [mem 0xfc3c0000-0xfc3dffff]
[ 0.281423] pci 0000:0d:00.0: reg 0x18: [io 0xece0-0xecff]
[ 0.281508] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.281609] pci 0000:0d:00.1: [8086:105e] type 00 class 0x020000
[ 0.281628] pci 0000:0d:00.1: reg 0x10: [mem 0xfc3a0000-0xfc3bffff]
[ 0.281640] pci 0000:0d:00.1: reg 0x14: [mem 0xfc380000-0xfc39ffff]
[ 0.281652] pci 0000:0d:00.1: reg 0x18: [io 0xecc0-0xecdf]
[ 0.281737] pci 0000:0d:00.1: PME# supported from D0 D3hot D3cold
[ 0.283018] pci 0000:00:04.0: PCI bridge to [bus 0d]
[ 0.283205] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.283210] pci 0000:00:04.0: bridge window [mem 0xfc300000-0xfc4fffff]
[ 0.283289] pci 0000:01:00.0: [8086:0370] type 01 class 0x060400
[ 0.283363] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.283466] pci 0000:01:00.2: [8086:0372] type 01 class 0x060400
[ 0.283539] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[ 0.285013] pci 0000:00:05.0: PCI bridge to [bus 01-03]
[ 0.285202] pci 0000:00:05.0: bridge window [mem 0xfc500000-0xfc7fffff]
[ 0.285209] pci 0000:00:05.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.285296] pci 0000:02:0e.0: [1028:0015] type 00 class 0x010400
[ 0.285322] pci 0000:02:0e.0: reg 0x10: [mem 0xd80f0000-0xd80fffff pref]
[ 0.285345] pci 0000:02:0e.0: reg 0x18: [mem 0xfc7c0000-0xfc7dffff]
[ 0.285386] pci 0000:02:0e.0: reg 0x30: [mem 0xfc600000-0xfc607fff pref]
[ 0.285435] pci 0000:02:0e.0: supports D1
[ 0.285520] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.285708] pci 0000:01:00.0: bridge window [mem 0xfc600000-0xfc7fffff]
[ 0.285716] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.285814] pci 0000:01:00.2: PCI bridge to [bus 03]
[ 0.286092] pci 0000:00:06.0: PCI bridge to [bus 0e]
[ 0.286330] pci 0000:00:07.0: PCI bridge to [bus 0f]
[ 0.286594] pci 0000:04:00.0: [1166:0103] type 01 class 0x060400
[ 0.286693] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.288016] pci 0000:00:1c.0: PCI bridge to [bus 04-05]
[ 0.288206] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.288285] pci 0000:05:00.0: [14e4:164c] type 00 class 0x020000
[ 0.288315] pci 0000:05:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.288424] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.288554] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.288747] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.288839] pci 0000:10:0d.0: [1002:515e] type 00 class 0x030000
[ 0.288860] pci 0000:10:0d.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.288873] pci 0000:10:0d.0: reg 0x14: [io 0xdc00-0xdcff]
[ 0.288887] pci 0000:10:0d.0: reg 0x18: [mem 0xfc2d0000-0xfc2dffff]
[ 0.288928] pci 0000:10:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.288963] pci 0000:10:0d.0: supports D1 D2
[ 0.289057] pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
[ 0.289247] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.289252] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
[ 0.289260] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.289264] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.289268] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.289271] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.289275] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff window] (subtractive decode)
[ 0.289278] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.292230] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.293055] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.293822] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.294560] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12)
[ 0.295319] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 12)
[ 0.296097] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.296860] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.297833] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.298815] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.299141] vgaarb: setting as boot device: PCI:0000:10:0d.0
[ 0.299214] vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.299528] vgaarb: loaded
[ 0.300004] vgaarb: bridge control possible 0000:10:0d.0
[ 0.300336] SCSI subsystem initialized
[ 0.300553] libata version 3.00 loaded.
[ 0.300553] ACPI: bus type USB registered
[ 0.300553] usbcore: registered new interface driver usbfs
[ 0.301022] usbcore: registered new interface driver hub
[ 0.301260] usbcore: registered new device driver usb
[ 0.301538] PCI: Using ACPI for IRQ routing
[ 0.308830] PCI: pci_cache_line_size set to 64 bytes
[ 0.309356] e820: reserve RAM buffer [mem 0xcfb50000-0xcfffffff]
[ 0.309586] NetLabel: Initializing
[ 0.309768] NetLabel: domain hash size = 128
[ 0.309949] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.310027] NetLabel: unlabeled traffic allowed by default
[ 0.310291] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.310482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.311004] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.313069] Switched to clocksource hpet
[ 0.327717] pnp: PnP ACPI init
[ 0.328177] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.328257] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.328552] pnp 00:02: [dma 2]
[ 0.328650] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.328980] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.329323] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.332434] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.332623] system 00:05: [io 0x0880-0x08bf] has been reserved
[ 0.332809] system 00:05: [io 0x08c0-0x08df] has been reserved
[ 0.332995] system 00:05: [io 0x08e0-0x08e3] has been reserved
[ 0.333189] system 00:05: [io 0x0900] has been reserved
[ 0.333374] system 00:05: [io 0x0c00-0x0c7f] has been reserved
[ 0.333560] system 00:05: [io 0x0ca0-0x0ca7] has been reserved
[ 0.333745] system 00:05: [io 0x0ca9-0x0cab] has been reserved
[ 0.333931] system 00:05: [io 0x0cad-0x0caf] has been reserved
[ 0.334125] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.334251] system 00:06: [io 0x0ca8] has been reserved
[ 0.334437] system 00:06: [io 0x0cac] has been reserved
[ 0.334624] system 00:06: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
[ 0.335548] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.335738] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335967] pnp: PnP ACPI: found 8 devices
[ 0.345049] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.346786] pci 0000:08:00.0: PCI bridge to [bus 09]
[ 0.347085] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.347543] pci 0000:07:00.0: PCI bridge to [bus 08-09]
[ 0.347864] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.348324] pci 0000:07:01.0: PCI bridge to [bus 0a]
[ 0.348919] pci 0000:06:00.0: PCI bridge to [bus 07-0a]
[ 0.349242] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.349700] pci 0000:06:00.3: PCI bridge to [bus 0b]
[ 0.350297] pci 0000:00:02.0: PCI bridge to [bus 06-0b]
[ 0.350484] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
[ 0.350675] pci 0000:00:03.0: PCI bridge to [bus 0c]
[ 0.350866] pci 0000:00:04.0: PCI bridge to [bus 0d]
[ 0.351057] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.351245] pci 0000:00:04.0: bridge window [mem 0xfc300000-0xfc4fffff]
[ 0.351437] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.351624] pci 0000:01:00.0: bridge window [mem 0xfc600000-0xfc7fffff]
[ 0.351812] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.352136] pci 0000:01:00.2: PCI bridge to [bus 03]
[ 0.352329] pci 0000:00:05.0: PCI bridge to [bus 01-03]
[ 0.352516] pci 0000:00:05.0: bridge window [mem 0xfc500000-0xfc7fffff]
[ 0.352705] pci 0000:00:05.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.353028] pci 0000:00:06.0: PCI bridge to [bus 0e]
[ 0.353219] pci 0000:00:07.0: PCI bridge to [bus 0f]
[ 0.353410] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.353599] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.353794] pci 0000:00:1c.0: PCI bridge to [bus 04-05]
[ 0.353981] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.354187] pci 0000:10:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref]
[ 0.354501] pci 0000:00:1e.0: PCI bridge to [bus 10]
[ 0.354685] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.354874] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
[ 0.355069] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.355389] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.355392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.355395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.355399] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff window]
[ 0.355402] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.355406] pci_bus 0000:06: resource 1 [mem 0xf2000000-0xf7ffffff]
[ 0.355409] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.355413] pci_bus 0000:08: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.355416] pci_bus 0000:09: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.355420] pci_bus 0000:0d: resource 0 [io 0xe000-0xefff]
[ 0.355423] pci_bus 0000:0d: resource 1 [mem 0xfc300000-0xfc4fffff]
[ 0.355427] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc7fffff]
[ 0.355430] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.355434] pci_bus 0000:02: resource 1 [mem 0xfc600000-0xfc7fffff]
[ 0.355438] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.355441] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.355445] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.355449] pci_bus 0000:10: resource 0 [io 0xd000-0xdfff]
[ 0.355452] pci_bus 0000:10: resource 1 [mem 0xfc100000-0xfc2fffff]
[ 0.355455] pci_bus 0000:10: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.355458] pci_bus 0000:10: resource 4 [io 0x0000-0x0cf7 window]
[ 0.355462] pci_bus 0000:10: resource 5 [io 0x0d00-0xffff window]
[ 0.355465] pci_bus 0000:10: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.355469] pci_bus 0000:10: resource 7 [mem 0xd0000000-0xfdffffff window]
[ 0.355472] pci_bus 0000:10: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.355532] NET: Registered protocol family 2
[ 0.356123] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.356643] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.357098] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.357368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.357597] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.357911] NET: Registered protocol family 1
[ 0.360695] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 0.360889] pci 0000:01:00.0: rerouting interrupts for [8086:0370]
[ 0.361088] pci 0000:01:00.2: rerouting interrupts for [8086:0372]
[ 0.361531] pci 0000:10:0d.0: Video device with shadowed ROM
[ 0.361535] PCI: CLS 64 bytes, default 64
[ 0.361654] Trying to unpack rootfs image as initramfs...
[ 13.727527] Freeing initrd memory: 49240K (ffff88007cfe9000 - ffff88007ffff000)
[ 13.727864] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 13.728069] software IO TLB [mem 0xcbb50000-0xcfb50000] (64MB) mapped at [ffff8800cbb50000-ffff8800cfb4ffff]
[ 13.728721] microcode: CPU0 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.728919] microcode: CPU1 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.729129] microcode: CPU2 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.729335] microcode: CPU3 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.729541] microcode: CPU4 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.733033] microcode: CPU5 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.733232] microcode: CPU6 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.733431] microcode: CPU7 sig=0x6f7, pf=0x40, revision=0x6b
[ 13.733736] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.735660] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 13.735906] Initialise system trusted keyring
[ 13.736135] audit: initializing netlink subsys (disabled)
[ 13.736363] audit: type=2000 audit(1475137452.735:1): initialized
[ 13.737175] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 13.741019] page_owner is disabled
[ 13.741214] zpool: loaded
[ 13.741393] zbud: loaded
[ 13.741838] VFS: Disk quotas dquot_6.6.0
[ 13.742106] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.742618] Key type big_key registered
[ 13.742803] SELinux: Registering netfilter hooks
[ 13.744750] alg: No test for stdrng (krng)
[ 13.744948] Key type asymmetric registered
[ 13.745149] Asymmetric key parser 'x509' registered
[ 13.745371] bounce: pool size: 64 pages
[ 13.745570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 13.745967] io scheduler noop registered
[ 13.746162] io scheduler deadline registered (default)
[ 13.746409] io scheduler cfq registered
[ 13.753256] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 13.753445] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 13.753633] pcieport 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 13.753820] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 13.754014] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 13.754200] pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
[ 13.754387] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[ 13.754576] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 13.754606] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 13.754797] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 13.754825] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 13.755021] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[ 13.755207] pci 0000:0d:00.1: Signaling PME through PCIe PME interrupt
[ 13.755395] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 13.755421] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 13.755608] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 13.755795] pci 0000:02:0e.0: Signaling PME through PCIe PME interrupt
[ 13.755980] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
[ 13.756179] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 13.756208] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 13.756397] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 13.756421] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 13.756611] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 13.756637] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 13.756825] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 13.757019] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 13.757207] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 13.757221] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.757436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 13.757681] intel_idle: does not run on family 6 model 15
[ 13.757825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 13.758152] ACPI: Power Button [PWRF]
[ 13.761496] ERST: Failed to get Error Log Address Range.
[ 13.761930] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 13.762255] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 13.783071] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 13.804037] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 13.805125] Non-volatile memory driver v1.3
[ 13.805359] Linux agpgart interface v0.103
[ 13.805709] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 13.805894] AMD IOMMUv2 functionality not available on this system
[ 13.810539] brd: module loaded
[ 13.812949] loop: module loaded
[ 13.813291] libphy: Fixed MDIO Bus: probed
[ 13.813549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 13.813740] ehci-pci: EHCI PCI platform driver
[ 13.814304] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 13.814555] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 13.814883] ehci-pci 0000:00:1d.7: debug port 1
[ 13.819699] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 13.819726] ehci-pci 0000:00:1d.7: irq 21, io mem 0xfc800000
[ 13.825022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 13.825285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.825473] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.825786] usb usb1: Product: EHCI Host Controller
[ 13.825970] usb usb1: Manufacturer: Linux 4.1.12-61.1.9.el6uek.x86_64 ehci_hcd
[ 13.826293] usb usb1: SerialNumber: 0000:00:1d.7
[ 13.826683] hub 1-0:1.0: USB hub found
[ 13.826876] hub 1-0:1.0: 8 ports detected
[ 13.827368] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 13.827559] ohci-pci: OHCI PCI platform driver
[ 13.827764] uhci_hcd: USB Universal Host Controller Interface driver
[ 13.828248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.828505] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 13.828825] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 13.829038] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0
[ 13.829432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.829619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.829932] usb usb2: Product: UHCI Host Controller
[ 13.830127] usb usb2: Manufacturer: Linux 4.1.12-61.1.9.el6uek.x86_64 uhci_hcd
[ 13.830441] usb usb2: SerialNumber: 0000:00:1d.0
[ 13.830813] hub 2-0:1.0: USB hub found
[ 13.831015] hub 2-0:1.0: 2 ports detected
[ 13.831609] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.831862] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 13.832192] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 13.832406] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0
[ 13.832804] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.832993] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.833318] usb usb3: Product: UHCI Host Controller
[ 13.833502] usb usb3: Manufacturer: Linux 4.1.12-61.1.9.el6uek.x86_64 uhci_hcd
[ 13.833815] usb usb3: SerialNumber: 0000:00:1d.1
[ 13.834196] hub 3-0:1.0: USB hub found
[ 13.834386] hub 3-0:1.0: 2 ports detected
[ 13.834964] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.835230] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 13.835553] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 13.835756] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0
[ 13.836155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.836342] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.836656] usb usb4: Product: UHCI Host Controller
[ 13.836839] usb usb4: Manufacturer: Linux 4.1.12-61.1.9.el6uek.x86_64 uhci_hcd
[ 13.837163] usb usb4: SerialNumber: 0000:00:1d.2
[ 13.837528] hub 4-0:1.0: USB hub found
[ 13.837718] hub 4-0:1.0: 2 ports detected
[ 13.838302] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 13.838560] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 13.838879] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 13.839091] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cc80
[ 13.839481] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.839669] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.839981] usb usb5: Product: UHCI Host Controller
[ 13.840177] usb usb5: Manufacturer: Linux 4.1.12-61.1.9.el6uek.x86_64 uhci_hcd
[ 13.840490] usb usb5: SerialNumber: 0000:00:1d.3
[ 13.840846] hub 5-0:1.0: USB hub found
[ 13.841048] hub 5-0:1.0: 2 ports detected
[ 13.841450] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 13.844477] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.844672] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.845107] mousedev: PS/2 mouse device common for all mice
[ 13.845549] rtc_cmos 00:01: RTC can wake from S4
[ 13.845905] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 13.846134] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 13.846743] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.847344] usbcore: registered new interface driver usbhid
[ 13.847528] usbhid: USB HID core driver
[ 13.847844] drop_monitor: Initializing network drop monitor service
[ 13.848167] gre: GRE over IPv4 demultiplexor driver
[ 13.848365] Initializing XFRM netlink socket
[ 13.848554] NET: Registered protocol family 17
[ 13.849537] Loading compiled-in X.509 certificates
[ 13.851323] Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c'
[ 13.853205] Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab'
[ 13.855079] Loaded X.509 cert 'Oracle CA Server: b458df40289e0936578e7f14741dd6f4e3fe4688'
[ 13.855414] registered taskstats version 1
[ 13.855664] ima: No TPM chip found, activating TPM-bypass!
[ 13.858497] rtc_cmos 00:01: setting system clock to 2016-09-29 08:24:13 UTC (1475137453)
[ 13.860346] Freeing unused kernel memory: 1796K (ffffffff81bfe000 - ffffffff81dbf000)
[ 14.381020] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 14.498468] usb 1-5: New USB device found, idVendor=13fe, idProduct=4100
[ 14.498657] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 14.498845] usb 1-5: Product: Silicon-Power16G
[ 14.499039] usb 1-5: Manufacturer: UFD 2.0
[ 14.499221] usb 1-5: SerialNumber: 13010506032E60031F450D3F092
[ 14.510299] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 14.511168] scsi host0: usb-storage 1-5:1.0
[ 14.511864] usbcore: registered new interface driver usb-storage
[ 14.601018] usb 1-7: new high-speed USB device number 4 using ehci-pci
[ 14.704022] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 14.715340] usb 1-7: New USB device found, idVendor=04b4, idProduct=6560
[ 14.715531] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 14.716033] hub 1-7:1.0: USB hub found
[ 14.716342] hub 1-7:1.0: 4 ports detected
[ 14.728031] tsc: Refined TSC clocksource calibration: 1596.477 MHz
[ 14.728222] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x17032502308, max_idle_ns: 440795277702 ns
[ 14.979020] usb 1-7.2: new low-speed USB device number 5 using ehci-pci
[ 15.059586] usb 1-7.2: New USB device found, idVendor=062a, idProduct=0201
[ 15.059776] usb 1-7.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 15.060100] usb 1-7.2: Product: USB-compliant keyboard
[ 15.063054] usb 3-2: New USB device found, idVendor=058f, idProduct=9254
[ 15.063245] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.063436] usb 3-2: Product: Generic USB Hub
[ 15.063620] usb 3-2: Manufacturer: ALCOR
[ 15.064106] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.0/0003:062A:0201.0001/input/input4
[ 15.066127] hub 3-2:1.0: USB hub found
[ 15.068055] hub 3-2:1.0: 4 ports detected
[ 15.115185] hid-generic 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.7-7.2/input0
[ 15.121550] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.1/0003:062A:0201.0002/input/input5
[ 15.172444] hid-generic 0003:062A:0201.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.7-7.2/input1
[ 15.347018] usb 3-2.2: new low-speed USB device number 3 using uhci_hcd
[ 15.472056] usb 3-2.2: New USB device found, idVendor=0458, idProduct=003a
[ 15.472246] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.472560] usb 3-2.2: Product: Optical Mouse
[ 15.472743] usb 3-2.2: Manufacturer: Genius
[ 15.501131] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/0003:0458:003A.0003/input/input6
[ 15.501665] hid-generic 0003:0458:003A.0003: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-2.2/input0
[ 15.512135] scsi 0:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G PMAP PQ: 0 ANSI: 4
[ 15.520017] sd 0:0:0:0: [sda] 31334400 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 15.521727] sd 0:0:0:0: [sda] Write Protect is off
[ 15.521914] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 15.523226] sd 0:0:0:0: [sda] No Caching mode page found
[ 15.523412] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 15.530238] sda: sda1
[ 15.534725] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 15.540850] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.570026] usb 3-2.3: new low-speed USB device number 4 using uhci_hcd
[ 15.704060] usb 3-2.3: New USB device found, idVendor=10d5, idProduct=000d
[ 15.704251] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.704566] usb 3-2.3: Product: SP04-A1
[ 15.704748] usb 3-2.3: Manufacturer: No brand
[ 15.704930] usb 3-2.3: SerialNumber: 1dВІ
[ 15.728133] Switched to clocksource tsc
[ 15.747195] input: No brand SP04-A1 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.3/3-2.3:1.0/0003:10D5:000D.0004/input/input7
[ 15.798153] hid-generic 0003:10D5:000D.0004: input,hidraw3: USB HID v1.10 Keyboard [No brand SP04-A1] on usb-0000:00:1d.1-2.3/input0
[ 15.804082] usbhid 3-2.3:1.1: couldn't find an input interrupt endpoint
[ 23.891091] random: dbus-uuidgen urandom read with 58 bits of entropy available
[ 25.935191] hotplug (170): /proc/170/oom_adj is deprecated, please use /proc/170/oom_score_adj instead.
[ 25.955951] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 25.966311] Loading iSCSI transport class v2.0-870.
[ 25.978624] iscsi: registered transport (tcp)
[ 25.987775] Floppy drive(s): fd0 is 1.44M
[ 26.000193] FDC 0 is a post-1991 82077
[ 26.007731] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 26.013079] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 26.021472] No iBFT detected.
[ 26.046980] NET: Registered protocol family 10
[ 26.093637] pps_core: LinuxPPS API ver. 1 registered
[ 26.093645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 26.096844] PTP clock support registered
[ 26.110141] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 26.110148] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 26.110512] e1000e 0000:0d:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 26.281897] e1000e 0000:0d:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:1d:0e:2a
[ 26.281905] e1000e 0000:0d:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 26.281985] e1000e 0000:0d:00.0 eth0: MAC: 0, PHY: 4, PBA No: C57721-004
[ 26.282271] e1000e 0000:0d:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 26.455812] e1000e 0000:0d:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:1d:0e:2b
[ 26.455817] e1000e 0000:0d:00.1 eth1: Intel(R) PRO/1000 Network Connection
[ 26.455896] e1000e 0000:0d:00.1 eth1: MAC: 0, PHY: 4, PBA No: C57721-004
[ 26.479571] ata_piix 0000:00:1f.1: version 2.13
[ 26.486186] scsi host1: ata_piix
[ 26.486471] scsi host2: ata_piix
[ 26.486642] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 26.486646] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 26.486825] ata2: port disabled--ignoring
[ 26.656320] ata1.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H492C, DE02, max UDMA/33
[ 26.678191] ata1.00: configured for UDMA/33
[ 26.680041] scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H492C DE02 PQ: 0 ANSI: 5
[ 26.690668] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 26.729438] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
[ 27.059812] bnx2 0000:05:00.0 eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:b9:aa:97
[ 27.392411] bnx2 0000:09:00.0 eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:b9:aa:99
[ 27.415839] megasas: 06.810.09.00-rc1
[ 27.416059] megaraid_sas 0000:02:0e.0: PCI IRQ 142 -> rerouted to legacy IRQ 18
[ 27.416670] megaraid_sas 0000:02:0e.0: FW now in Ready state
[ 27.416676] megaraid_sas 0000:02:0e.0: firmware supports msix : (0)
[ 27.416680] megaraid_sas 0000:02:0e.0: current msix/online cpus : (0/8)
[ 27.416683] megaraid_sas 0000:02:0e.0: RDPQ mode : (disabled)
[ 27.551023] megaraid_sas 0000:02:0e.0: controller type : MR(256MB)
[ 27.551031] megaraid_sas 0000:02:0e.0: Online Controller Reset(OCR) : Enabled
[ 27.551034] megaraid_sas 0000:02:0e.0: Secure JBOD support : No
[ 27.551040] megaraid_sas 0000:02:0e.0: megasas_init_mfi: fw_support_ieee=0
[ 27.551044] megaraid_sas 0000:02:0e.0: INIT adapter done
[ 27.551048] megaraid_sas 0000:02:0e.0: Jbod map is not supported megasas_setup_jbod_map 4935
[ 27.551061] megaraid_sas 0000:02:0e.0: fw state:c0000000
[ 27.551069] megaraid_sas 0000:02:0e.0: fwstate:c0000000, dis_OCR=0
[ 28.573047] megaraid_sas 0000:02:0e.0: Failed from megasas_issue_polled 1009
[ 28.573054] megaraid_sas 0000:02:0e.0: Failed from megasas_issue_polled 1009
[ 28.573068] megaraid_sas 0000:02:0e.0: pci id : (0x1028)/(0x0015)/(0x1028)/(0x1f03)
[ 28.573071] megaraid_sas 0000:02:0e.0: unevenspan support : no
[ 28.573074] megaraid_sas 0000:02:0e.0: firmware crash dump : no
[ 28.573077] megaraid_sas 0000:02:0e.0: jbod sync map : no
[ 28.573087] scsi host3: Avago SAS based MegaRAID driver
[ 28.573252] megaraid_sas 0000:02:0e.0: Failed from megasas_issue_blocked_cmd 1037
[ 28.573256] megaraid_sas 0000:02:0e.0: DCMD failed from megasas_get_seq_num
[ 28.586429] megaraid_sas 0000:02:0e.0: wait adp restart
[ 28.586476] megaraid_sas 0000:02:0e.0: fwState=f0000000, stage:1
[ 28.586532] megaraid_sas 0000:02:0e.0: FW detected to be in faultstate, restarting it...
[ 31.589017] megaraid_sas 0000:02:0e.0: pcidata = 30400
[ 31.589022] megaraid_sas 0000:02:0e.0: FW restarted successfully,initiating next stage...
[ 31.589025] megaraid_sas 0000:02:0e.0: HBA recovery state machine,state 2 starting...
[ 33.446262] random: nonblocking pool is initialized
[ 61.619033] megaraid_sas 0000:02:0e.0: Waiting for FW to come to ready state
[ 61.619040] megaraid_sas 0000:02:0e.0: FW in FAULT state!!
[ 68.750066] usb 3-2.2: USB disconnect, device number 3
[ 70.204018] usb 3-2.2: new low-speed USB device number 5 using uhci_hcd
[ 70.327058] usb 3-2.2: New USB device found, idVendor=0458, idProduct=003a
[ 70.327063] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 70.327067] usb 3-2.2: Product: Optical Mouse
[ 70.327070] usb 3-2.2: Manufacturer: Genius
[ 70.354770] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/0003:0458:003A.0005/input/input9
[ 70.354996] hid-generic 0003:0458:003A.0005: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-2.2/input0
[ 123.790069] usb 3-2.2: USB disconnect, device number 5
[ 125.244012] usb 3-2.2: new low-speed USB device number 6 using uhci_hcd
[ 125.367068] usb 3-2.2: New USB device found, idVendor=0458, idProduct=003a
[ 125.367073] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 125.367077] usb 3-2.2: Product: Optical Mouse
[ 125.367081] usb 3-2.2: Manufacturer: Genius
[ 125.394786] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/0003:0458:003A.0006/input/input10
[ 125.394999] hid-generic 0003:0458:003A.0006: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-2.2/input0
[ 178.830079] usb 3-2.2: USB disconnect, device number 6
[ 180.284017] usb 3-2.2: new low-speed USB device number 7 using uhci_hcd
[ 180.407074] usb 3-2.2: New USB device found, idVendor=0458, idProduct=003a
[ 180.407079] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 180.407082] usb 3-2.2: Product: Optical Mouse
[ 180.407086] usb 3-2.2: Manufacturer: Genius
[ 180.435015] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/0003:0458:003A.0007/input/input11
[ 180.435415] hid-generic 0003:0458:003A.0007: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-2.2/input0
[ 194.318081] usb 3-2.2: USB disconnect, device number 7
[ 206.210034] blk_update_request: I/O error, dev fd0, sector 0
[ 206.210040] floppy: error -5 while reading block 0
[ 206.324428] Module mlx4_core locked in memory until next boot
[ 206.473205] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 206.473213] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 206.473541] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 206.538549] [drm] Initialized drm 1.1.0 20060810
[ 206.628079] [drm] radeon kernel modesetting enabled.
[ 206.635284] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B1).
[ 206.635310] [drm] register mmio base: 0xFC2D0000
[ 206.635313] [drm] register mmio size: 65536
[ 206.635454] radeon 0000:10:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
[ 206.635458] radeon 0000:10:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[ 206.635473] [drm] Detected VRAM RAM=128M, BAR=128M
[ 206.635475] [drm] RAM width 16bits DDR
[ 206.635565] [TTM] Zone kernel: Available graphics memory: 2020370 kiB
[ 206.635567] [TTM] Initializing pool allocator
[ 206.635578] [TTM] Initializing DMA pool allocator
[ 206.635616] [drm] radeon: 16M of VRAM memory ready
[ 206.635618] [drm] radeon: 512M of GTT memory ready.
[ 206.635645] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 206.657260] [drm] PCI GART of 512M enabled (table at 0x00000000C9300000).
[ 206.658504] radeon 0000:10:0d.0: WB disabled
[ 206.658511] radeon 0000:10:0d.0: