Infrastructure Software

Hi,

I am unable to start vncserver on OEL5.6 (32-bit) and NO output can be viewed in monitor.
FYI...
# vncserver
Unable to start Xvnc, exiting

==========================================================================
Note :

# echo $SHELL
/bin/bash
[root@linux1][root]
# cat /etc/passwd | grep root
root:x:0:0:root:/root:/bin/bash
operator:x:11:0:operator:/root:/sbin/nologin
[root@linux1][root]
# /etc/init.d/vncserver status
Xvnc is stopped
[root@linux1][root]
# /etc/init.d/vncserver restart
Shutting down VNC server: 1:root 2:oraprd1 [FAILED]
Starting VNC server: 1:root
Warning: linux1.oracle.com:1 is taken because of /tmp/.X1-lock
Remove this file if there is no X server linux1.oracle.com:1
A VNC server is already running as :1
[FAILED]
[root@linux1][root]
# set -x
++ echo -ne '\033]0;root@linux1:~'

[root@linux1][root]
# source /etc/init.d/vncserver start
+ source /etc/init.d/vncserver start
++ . /etc/init.d/functions
+++ TEXTDOMAIN=initscripts
+++ umask 022
+++ PATH=/sbin:/usr/sbin:/bin:/usr/bin
+++ export PATH
+++ '[' -z 158 ']'
+++ '[' -z '' ']'
++++ /sbin/consoletype
+++ CONSOLETYPE=pty
+++ '[' -f /etc/sysconfig/i18n -a -z '' ']'
+++ . /etc/profile.d/lang.sh
++++ sourced=0
++++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
++++ '[' -f /etc/sysconfig/i18n ']'
++++ . /etc/sysconfig/i18n
+++++ LANG=en_US.UTF-8
+++++ SYSFONT=latarcyrheb-sun16
++++ sourced=1
++++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
++++ '[' -f /root/.i18n ']'
++++ '[' -n '' ']'
++++ '[' 1 = 1 ']'
++++ '[' -n en_US.UTF-8 ']'
++++ export LANG
++++ '[' -n '' ']'
++++ unset LC_ADDRESS
++++ '[' -n '' ']'
++++ unset LC_CTYPE
++++ '[' -n '' ']'
++++ unset LC_COLLATE
++++ '[' -n '' ']'
++++ unset LC_IDENTIFICATION
++++ '[' -n '' ']'
++++ unset LC_MEASUREMENT
++++ '[' -n '' ']'
++++ unset LC_MESSAGES
++++ '[' -n '' ']'
++++ unset LC_MONETARY
++++ '[' -n '' ']'
++++ unset LC_NAME
++++ '[' -n '' ']'
++++ unset LC_NUMERIC
++++ '[' -n '' ']'
++++ unset LC_PAPER
++++ '[' -n '' ']'
++++ unset LC_TELEPHONE
++++ '[' -n '' ']'
++++ unset LC_TIME
++++ '[' -n '' ']'
++++ unset LC_ALL
++++ '[' -n '' ']'
++++ unset LANGUAGE
++++ '[' -n '' ']'
++++ unset LINGUAS
++++ '[' -n '' ']'
++++ unset XKBCHARSET
++++ consoletype=pty
++++ '[' -z pty ']'
++++ '[' -n '' ']'
++++ '[' -n '' ']'
++++ '[' -n en_US.UTF-8 ']'
++++ case $LANG in
++++ '[' xterm = linux ']'
++++ unset SYSFONTACM SYSFONT
++++ unset sourced
++++ unset langfile
+++ '[' -z '' ']'
+++ '[' -f /etc/sysconfig/init ']'
+++ . /etc/sysconfig/init
++++ BOOTUP=color
++++ GRAPHICAL=yes
++++ RES_COL=60
++++ MOVE_TO_COL='echo -en \033[60G'
++++ SETCOLOR_SUCCESS='echo -en \033[0;32m'
++++ SETCOLOR_FAILURE='echo -en \033[0;31m'
++++ SETCOLOR_WARNING='echo -en \033[0;33m'
++++ SETCOLOR_NORMAL='echo -en \033[0;39m'
++++ LOGLEVEL=3
++++ PROMPT=yes
++++ AUTOSWAP=no
+++ '[' pty = serial ']'
+++ '[' color '!=' verbose ']'
+++ INITLOG_ARGS=-q
+++ __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
++ . /etc/sysconfig/network
+++ NETWORKING=yes
+++ NETWORKING_IPV6=yes
+++ HOSTNAME=linux1.oracle.com
+++ GATEWAY=192.168.1.1
++ '[' yes = no ']'
++ unset VNCSERVERARGS
++ VNCSERVERS=
++ '[' -f /etc/sysconfig/vncservers ']'
++ . /etc/sysconfig/vncservers
+++ VNCSERVERS='1:root 2:oraprd1'
+++ VNCSERVERARGS[1]='-geometry 800x600'
++ prog='VNC server'
++ case "$1" in
++ start
++ echo -n 'Starting VNC server: '
Starting VNC server: ++ ulimit -S -c 0
++ RETVAL=0
++ '[' '!' -d /tmp/.X11-unix ']'
++ NOSERV=1
++ for display in '${VNCSERVERS}'
++ NOSERV=
++ echo -n '1:root '
1:root ++ unset BASH_ENV ENV
++ DISP=1
++ export USER=root
++ USER=root
++ export 'VNCUSERARGS=-geometry 800x600'
++ VNCUSERARGS='-geometry 800x600'
++ runuser -l root -c 'cd ~root && [ -f .vnc/passwd ] && vncserver :1 -geometry 800x600'

Warning: linux1.oracle.com:1 is taken because of /tmp/.X1-lock
Remove this file if there is no X server linux1.oracle.com:1
A VNC server is already running as :1
++ RETVAL=29
++ '[' 29 -ne 0 ']'
++ break
++ test -n ''
++ '[' 29 -eq 0 ']'
++ failure 'vncserver start'
++ local rc=1
++ '[' color '!=' verbose -a -z '' ']'
++ echo_failure
++ '[' color = color ']'
++ echo -en '\033[60G'
++ echo -n '['
[++ '[' color = color ']'
++ echo -en '\033[0;31m'
++ echo -n FAILED
FAILED++ '[' color = color ']'
++ echo -en '\033[0;39m'
++ echo -n ']'
]++ echo -ne '\r'
++ return 1
++ '[' -x /usr/bin/rhgb-client ']'
++ /usr/bin/rhgb-client --details=yes
++ return 1
++ echo

++ '[' 29 -eq 0 ']'
++ echo -ne '\033]0;root@linux1:~'

[root@linux1][root]
# set +x
+ set +x
==========================================================================
Thanks.
Joy.

Edited by: user11952526 on Oct 24, 2012 8:10 PM