Hardware

I recently installed the 10_Recommended cluster (June 2, 2008 release) and following the cluster install, I am no longer able to see an external enclosure via "luxadm probe" although I can still see all the disks within it as well as the internal FCloop. I have searched and seen some similar issues, but nothing seems to work in my situation. Here is some info that may or may not help diagnose this:

V880 with A5200 array connected via two single PCI ISP2200A HBAs (dual loop configuration)

/var/adm/messages:
.
Jul 15 17:47:44 sancorpdb2 scsi: [ID 243001 kern.warning] WARNING: /pci@9,600000/SUNW,qlc@2/fp@0,0 (fcp0):
Jul 15 17:47:44 sancorpdb2 INQUIRY-83 to D_ID=0xb5 lun=0x0 failed: State:Local Reject, Reason:Illegal Request. Giving up
Jul 15 17:47:44 sancorpdb2 scsi: [ID 243001 kern.warning] WARNING: /pci@9,600000/SUNW,qlc@1/fp@0,0 (fcp1):
Jul 15 17:47:44 sancorpdb2 INQUIRY-83 to D_ID=0xd2 lun=0x0 failed: State:Local Reject, Reason:Illegal Request. Giving up
.



cfgadm -al -o show_SCSI_LUN
.
c2::5080020000088083 ESI connected unconfigured unknown
c2::5080020000088084 ESI connected unconfigured unknown
.
c3::5080020000088081 ESI connected unconfigured unknown
c3::5080020000088082 ESI connected unconfigured unknown
.

There are also no /dev/es links for this array. I have attempted "luxadm insert", "drvconfig -i ses", "desvfsadm -C", and "reboot -- -r" but nothing seems to work.
Can anyone point me in the right direction to figure out what is wrong.

Thanks,
Chris