Hardware

Hi,
Trying to install solaris 10 from a DVD on Sun T5220 box with 32GB but keep getting ERROR: boot-read fail.

Downloaded Solaris 10 from edelivery and burned a DVD, using two software but both same issue.
The values for cdrom from printenv and probe-scsi-all are different and in probe-scsi-all the DVD drive doesn't have a Target ??


{0} ok printenv
boot-device disk net disk net
..

{0} ok devalias
cdrom /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f (this is different value from probe-scsi-all ??)

{0} ok probe-scsi-all
/pci@0/pci@0/pci@2/scsi@0

MPT Version 1.05, Firmware Version 1.22.00.00

Target 0
Unit 0 Disk HITACHI H106030SDSUN300GA130 585937500 Blocks, 300 GB
SASAddress 5000cca0120105cd PhyNum 0
Target 1
Unit 0 Disk HITACHI H103030SCSUN300GA150 585937500 Blocks, 300 GB
SASAddress 5000cca00a013059 PhyNum 1
Target 2
Unit 0 Disk HITACHI H106030SDSUN300GA130 585937500 Blocks, 300 GB
SASAddress 5000cca01200fa35 PhyNum 2
Target 3
Unit 0 Disk HITACHI H103030SCSUN300GA120 585937500 Blocks, 300 GB
SASAddress 5000cca00a013dd5 PhyNum 3
Target 4
Unit 0 Disk HITACHI H103030SCSUN300GA2A8 585937500 Blocks, 300 GB
SASAddress 5000cca00a7c887d PhyNum 4

/pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0
Unit 0 Removable Read Only device TSSTcorpCDDVDW TS-T633C SR01


{0} ok boot cdrom - text

SPARC Enterprise T5220, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.10, 32640 MB memory available, Serial #82589536.
Ethernet address 0:14:4f:ec:37:60, Host ID: 84ec3760.

Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f File and args: - text
ERROR: boot-read fail

Evaluating:
Can't locate boot device


** Tried also:
{0} ok boot /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0 -nowin

SPARC Enterprise T5220, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.10, 32640 MB memory available, Serial #82589536.
Ethernet address 0:14:4f:ec:37:60, Host ID: 84ec3760.

Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0 File and args: -nowin
ERROR: boot-read fail

Evaluating:
Boot load failed

We are stuck right at the beginning from installation. What could be the issue?
Thanks for your assistance.