Hardware

Hi,

Looking like the onboard raid is reserving Target 0 somehow and not sure how to clear it without having the original disks to activate the raid volume Target 0. Any suggestions? The drives are in the correct physical locations for target 0 and 1, but they are showing as target 1 and 2. Is there any way to reset/clear the onboard raid controller?

Thanks,
Steve

{0} ok probe-scsi-all
/pci@780/pci@0/pci@9/scsi@0

MPT Version 1.05, Firmware Version 1.09.00.00

Target 1
Unit 0 Disk FUJITSU MBB2073RCSUN72G 0505 143374738 Blocks, 73 GB
SASAddress 500000e0186212b2 PhyNum 1
Target 2
Unit 0 Disk FUJITSU MBB2073RCSUN72G 0505 143374738 Blocks, 73 GB
SASAddress 500000e017bd0402 PhyNum 2


{0} ok select /pci@780/pci@0/pci@9/scsi@0

{0} ok show-volumes
No volumes to show

# raidctl -l 0
Controller Type Version
----------------------------------------------------------------
c0 LSI_1064EE 1.09.00.00

# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c0::dsk/c0t2d0 disk connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 CD-ROM connected configured unknown

Edited by: 857848 on 10-May-2011 10:11 AM