SunFire V100 doesn't support disks over 127GB??
nagarddSep 3 2007 — edited Sep 4 2007Hi All,
I have a SunFire V100 server. And recently I have bought a new disk 320GB.
But the format display that this disk has only 127 GB:
-----------------------------------------------------------------------------------------------
Volume name = < >
ascii name = <ST3320620A cyl 65533 alt 2 hd 16 sec 255>
pcyl = 65535
ncyl = 65533
acyl = 2
nhead = 16
nsect = 255
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 65532 127.49GB (65533/0/0) 267374640
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
-------------------------------------------------------------------------------------------------
Running iostat -En shows:
-----------------------------------------------------------------------------------------------
c0t2d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: ST3320620A Revision: 3.AAE Serial No: 6QF0
Size: 137.44GB <137438952960 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0
c0t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
-----------------------------------------------------------------------------------------------
Is there any solution to have 320 GB available?
Kind regards,
Daniel