Hi all.
Yesterday I was updating ILOM and BIOS on my Netras to version ILOM 3.0.16.25.b r83416. I know that is not the last one. Everything was fine till one server stop to boot after update. It fall into ILOM loop rebooting.
Log attached. (bootlog.txt)
After that I tried to restore ILOM through preboot menu.
Preboot> net flash 10.63.211.200 ilom.X4270-3.0.16.25.b-r83416.pkg
Using faradaynic#0 device
host 10.63.211.200 is alive
Downloading ILOM image to scratch RAM (load_addr = 0x2000000)...
Using faradaynic#0 device
TFTP from server 10.63.211.200; our IP address is 10.63.211.55
Filename 'ilom.X4270-3.0.16.25.b-r83416.pkg'.
Load address: 0x2000000
Loading: ##...##
done
Bytes transferred = 13904223 (d4295f hex)
Press any key to abort before erasing begins.
pbmenu: Can't find package header; downloaded file is not an ILOM image.
The service manual for Netras says that restoring possible only from Gui or CLI. But I have no access to both.
In Sun Fire X4270 service manual there is a note that I should use .flash file for restoring ILOM and BIOS from preboot.
On MOS there is no any .flash files for Netra X4270. Only for Sun Fire.
My questing is: can I flash .flash file for Sun Fire to my Nerta. And there can I get correct file if not.
Thanks a lot.
Here