Sun Fire V125 memory upgrade issue... disaster!!
807557Nov 16 2008 — edited Nov 17 2008Hello all,
I have done memory upgrade to the Sun Fire v125 according to the recommendations on the Sun website; PC2100 DDR 266 Mhz (2 X 2GB) ECC registered kit.
Upon installing the RAM the system gave the following output:
----------------------------------------------------------------------------------------------
"0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
SC Alert: Host System has Reset
Configuring system memory & CPU(s)
ERROR: CPU0 DIMM 2 SPD reports DIMM cycle time is less than 133 MHz
System configuration failed, powering off
SC Alert: Host system has shut down."
------------------------------------------------------------------
And then system shuts down!!!
Could anybody please help? I am not sure what is the problem, as the RAM was bought according to specifications.
Is it to do with the system firmware? will updgrading it or degrading it solve the problem?
Thanks in advance,
Yazeed