Hardware

Hi,

i've bought an old Sun E450 and had to replace the NVRAM chip. Unfortunately the "battery is low"-Warning hasn't disappeared yet. Anyway, i try to install Solaris 8 and run into "Division by Zero"-Errors immediately after a "boot cdrom". Can anybody tell me, if this is a hardware problem or if i'm just too stupid to install? Screen output is below...

Thanks,
Johannes

Screen Output:
============

? 'mfg-options' environment variable invalid

<Logo RaptorGFX>
Sun Ultra 450 (UltraSPARC-II 400MHz), Keyboard Present
Openboot 3.14, 2048MB Memory installed, Serial #16777215
Ethernet address ff:ff:ff:ff:ff:ff:, Host ID: ffffffff

The IDPROM contents are invalid

Initializing 1 megs of memory at addr 7fe00000
Initializing 2046 megs of memory at addr 0

? All CPUs failed POST and/or are disabled
? All memory failed POST and/or is disabled

Boot device: net File and args:
Internal loopback test -- Did not receive expected loopback packet
Evaluating: boot
Can't open boot device

ok set-defaults
Setting NVRAM parameters to default values
Platform is configured as an unknown platform type 0x05
ok setenv diag-switch? false
diag-switch? = false
ok f idprom@ 1 xor f mkp
ok 8 0 20 c4 6c a1 c46ca1 mkpl
Control-D
Control-R
ok .idprom
Format/Type: 1 80 Ethernet: 8 0 20 c4 6c a1 Date: ff ff ff ff
Serial c4 6c a1 Checksum a9
ok reset

Warning -- Real-Time-Clock (and NVRAM) battery is low

? 'mfg-options' environment variable invalid

<Logo RaptorGFX>
Sun Ultra 450 (UltraSPARC-II 400MHz), Keyboard Present
Openboot 3.14, 2048MB Memory installed, Serial #12872865
Ethernet address 8:0:20:c4:6c:a1, Host ID: 80c46ca1

? All CPUs failed POST and/or are disabled
? All memory failed POST and/or is disabled

Boot device: disk File and args:
Division by Zero

ok boot cdrom -v

Warning -- Real-Time-Clock (and NVRAM) battery is low

? 'mfg-options' environment variable invalid

<Logo RaptorGFX>
Sun Ultra 450 (UltraSPARC-II 400MHz), Keyboard Present
Openboot 3.14, 2048MB Memory installed, Serial #12872865
Ethernet address 8:0:20:c4:6c:a1, Host ID: 80c46ca1

? All CPUs failed POST and/or are disabled
? All memory failed POST and/or is disable
Rebooting with command: boot cdrom -v
Boot device: /pci@1f,4000/scsi@2/disk@6,0:f File and args: -v
Size: 344496+88281+61647 Bytes
Division by Zero
ok

ok .post
System Status: Failed
CPU0 : IMMU Failed
CPU1 : IMMU Failed
CPU2 : IMMU Failed
CPU3 : IMMU Failed
PC-Marvin : Failed
Psycho@1 : Failed
Psycho@4 : Ok
Psycho@6 : Failed
CheerIO : Ok
SCSI : Ok
MemBank0 : DIMM0 -- Failed
DIMM1 -- Ok
DIMM2 -- Failed
DIMM3 -- Ok
MemBank1 : DIMM0 -- Failed
DIMM1 -- Ok
DIMM2 -- Failed
DIMM3 -- Ok
MemBank2 : DIMM0 -- Failed
DIMM1 -- Ok
DIMM2 -- Failed
DIMM3 -- Ok
MemBank3 : DIMM0 -- Failed
DIMM1 -- Ok
DIMM2 -- Failed
DIMM3 -- Ok
PROM : Failed
NVRAM : Ok
TTY : Failed
Audio : Ok
SuperIO : Failed

ok test-all
<no errors>

ok .version
Release 3.14 Version 1 created 1999/02/12 07:50
OBP 3.14.1 1999/02/12 07:50
POST 6.0.9 1999/02/12 07:52
OBDIAG 4.4.1 1999/02/12 07:51