Hello All
I have an issue with new implementation, I have server oracle S7-2 which I have installed solaris 11.3 on it.
the server has two Emulex cards dual ports 16 Gb/s. (Model: LPe16002B-M6-L,first card Firmware Version: LPe16002B-M6-L 1.1.44.0,
and second card Firmware Version: LPe16002B-M6-L 11.2.156.27 )
I am trying to increase the maxvfs = 1 which now is 1.
can I increase this number so i can create more PF for example
ldm create-vf -n 7 /SYS/MB/RISER1/PCIE1/IOVFC.PF0
please check below output
root@zu-ovs01:~# fcinfo hba-port
HBA Port WWN: 10000090fa732527
Port Mode: Initiator
Port ID: 10300
OS Device Name: /dev/cfg/c18
Manufacturer: Emulex
Model: LPe16002B-M6-L
Firmware Version: LPe16002B-M6-L 1.1.44.0
FCode/BIOS Version: Boot:1.1.44.0 Fcode:4.03a0
Serial Number: FC42406787
Driver Name: emlxs
Driver Version: 3.1.01.0 (2016.05.23.12.00)
Type: N-port
State: online
Supported Speeds: 4Gb 8Gb 16Gb
Current Speed: 16Gb
Node WWN: 20000090fa732527
Max NPIV Ports: 255
NPIV port list:
HBA Port WWN: 10000090fa732581
Port Mode: Initiator
Port ID: 10200
OS Device Name: /dev/cfg/c16
Manufacturer: Emulex
Model: LPe16002B-M6-L
Firmware Version: LPe16002B-M6-L 11.2.156.27
FCode/BIOS Version: Boot:11.2.156.27 Fcode:4.03a9
Serial Number: FC42406737
Driver Name: emlxs
Driver Version: 3.1.01.0 (2016.05.23.12.00)
Type: N-port
State: online
Supported Speeds: 4Gb 8Gb 16Gb
Current Speed: 16Gb
Node WWN: 20000090fa732581
Max NPIV Ports: 255
NPIV port list:
HBA Port WWN: 10000090fa732582
Port Mode: Initiator
Port ID: 10200
OS Device Name: /dev/cfg/c17
Manufacturer: Emulex
Model: LPe16002B-M6-L
Firmware Version: LPe16002B-M6-L 11.2.156.27
FCode/BIOS Version: Boot:11.2.156.27 Fcode:4.03a9
Serial Number: FC42406737
Driver Name: emlxs
Driver Version: 3.1.01.0 (2016.05.23.12.00)
Type: N-port
State: online
Supported Speeds: 4Gb 8Gb 16Gb
Current Speed: 16Gb
Node WWN: 20000090fa732582
Max NPIV Ports: 255
NPIV port list:
HBA Port WWN: 10000090fa732528
Port Mode: Initiator
Port ID: 0
OS Device Name: /dev/cfg/c19
Manufacturer: Emulex
Model: LPe16002B-M6-L
Firmware Version: LPe16002B-M6-L 1.1.44.0
FCode/BIOS Version: Boot:1.1.44.0 Fcode:4.03a0
Serial Number: FC42406787
Driver Name: emlxs
Driver Version: 3.1.01.0 (2016.05.23.12.00)
Type: unknown
State: offline
Supported Speeds: 4Gb 8Gb 16Gb
Current Speed: not established
Node WWN: 20000090fa732528
Max NPIV Ports: 255
NPIV port list:
root@zu-ovs01:~#
root@zu-ovs01:~# ldm ls-io -l
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
pci_0 BUS pci_0 primary IOV
[pci@300]
pci_2 BUS pci_2 primary IOV
[pci@302]
/SYS/MB/RISER3/PCIE3 PCIE pci_0 primary EMP
[pci@300/pci@2/pci@0/pci@13]
/SYS/MB/NET0 PCIE pci_0 primary OCC
[pci@300/pci@1/pci@0/pci@1]
network@0
network@0,1
network@0,2
network@0,3
/SYS/MB/RISER1/PCIE1 PCIE pci_2 primary OCC
[pci@302/pci@1/pci@0/pci@11]
emlx@0/fp/disk
emlx@0/fp/st
emlx@0/fp@0,0
emlx@0,1/fp/disk
emlx@0,1/fp/st
emlx@0,1/fp@0,0
/SYS/MB/RISER2/PCIE2 PCIE pci_2 primary OCC
[pci@302/pci@1/pci@0/pci@12]
emlx@0/fp/disk
emlx@0/fp/st
emlx@0/fp@0,0
emlx@0,1/fp/disk
emlx@0,1/fp/st
emlx@0,1/fp@0,0
/SYS/MB/RISER3/PCIE4 PCIE pci_2 primary OCC
[pci@302/pci@2/pci@0/pci@14]
LSI,sas@0/iport@1
LSI,sas@0/iport@2
LSI,sas@0/iport@4
LSI,sas@0/iport@8
LSI,sas@0/iport@40
LSI,sas@0/iport@80
/SYS/MB/NET0/IOVNET.PF0 PF pci_0 primary
[pci@300/pci@1/pci@0/pci@1/network@0]
maxvfs = 31
/SYS/MB/NET0/IOVNET.PF1 PF pci_0 primary
[pci@300/pci@1/pci@0/pci@1/network@0,1]
maxvfs = 31
/SYS/MB/NET0/IOVNET.PF2 PF pci_0 primary
[pci@300/pci@1/pci@0/pci@1/network@0,2]
maxvfs = 31
/SYS/MB/NET0/IOVNET.PF3 PF pci_0 primary
[pci@300/pci@1/pci@0/pci@1/network@0,3]
maxvfs = 31
/SYS/MB/RISER1/PCIE1/IOVFC.PF0 PF pci_2 primary
[pci@302/pci@1/pci@0/pci@11/emlx@0]
maxvfs = 1
/SYS/MB/RISER1/PCIE1/IOVFC.PF1 PF pci_2 primary
[pci@302/pci@1/pci@0/pci@11/emlx@0,1]
maxvfs = 1
/SYS/MB/RISER2/PCIE2/IOVFC.PF0 PF pci_2 primary
[pci@302/pci@1/pci@0/pci@12/emlx@0]
maxvfs = 1
/SYS/MB/RISER2/PCIE2/IOVFC.PF1 PF pci_2 primary
[pci@302/pci@1/pci@0/pci@12/emlx@0,1]
maxvfs = 1
many thanks in advance