Solaris 10 instalation in Guest Domain - Timed out waiting for TFTP reply
807567Sep 26 2008 — edited Oct 20 2008I have the next trouble
I have a Sun Fire T1000 and i want install two Guest LDOM's with Solaris10 in each one, I Install the LDOM Manager 1.0.3 and the service is "online" also the another services needed
First Setup the 2 Guest LDOM's in the primary Domain sucesfully .... here is a desc of the configuration.
# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 1G 0.1% 2h 14m
MAC
00:14:4f:a7:85:1e
VCPU
VID PID UTIL STRAND
0 0 0.2% 100%
1 1 0.2% 100%
2 2 0.1% 100%
3 3 0.1% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 1G
VARIABLES
diag-switch?=true
security-#badlogins=0
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
aplica_srss1@primary-vcc0 5001
aplica_prod@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:a7:85:1e bge0 switch@0
PEER MAC
vnet2@aplica_srss1 00:14:4f:fb:f4:e0
vnet1@aplica_prod 00:14:4f:fb:2c:60
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 vol1 /dev/dsk/c0t0d0s3
CLIENT VOLUME
vdisk1@aplica_prod vol1
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aplica_prod active -t--- 5000 4 2G 15% 9m
MAC
00:14:4f:fb:2c:60
VCPU
VID PID UTIL STRAND
0 4 35% 100%
1 5 0.0% 100%
2 6 7.0% 100%
3 7 84% 100%
MEMORY
RA PA SIZE
0x8000000 0x48000000 2G
VARIABLES
auto-boot?=true
boot-device=
use-nvramrc?=true
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0@primary network@0 00:14:4f:fb:2c:60
PEER MAC
primary-vsw0@primary 00:14:4f:a7:85:1e
vnet2@aplica_srss1 00:14:4f:fb:f4:e0
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk1 vol1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
aplica_prod primary-vcc0@primary 5000
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aplica_srss1 bound ----- 5001 24 13184M
MAC
00:14:4f:fb:ad:fb
VCPU
VID PID UTIL STRAND
0 8 100%
1 9 100%
2 10 100%
3 11 100%
4 12 100%
5 13 100%
6 14 100%
7 15 100%
8 16 100%
9 17 100%
10 18 100%
11 19 100%
12 20 100%
13 21 100%
14 22 100%
15 23 100%
16 24 100%
17 25 100%
18 26 100%
19 27 100%
20 28 100%
21 29 100%
22 30 100%
23 31 100%
MEMORY
RA PA SIZE
0x8000000 0xc8000000 13184M
VARIABLES
auto-boot?=true
boot-device=
NETWORK
NAME SERVICE DEVICE MAC
vnet2 primary-vsw0@primary network@0 00:14:4f:fb:f4:e0
PEER MAC
primary-vsw0@primary 00:14:4f:a7:85:1e
vnet1@aplica_prod 00:14:4f:fb:2c:60
VCONS
NAME SERVICE PORT
aplica_srss1 primary-vcc0@primary 5001
Then i mount the ISO images of The solaris OS 5/08, Later install the jumpstart server without troubles.... Here are the Configuration files needed for the properly setup of the service for a better guide