SCSI warnings - Solaris 10 Install - Netra 240
807557Oct 13 2009 — edited Oct 15 2009Hi Friends,
Im doing some installation using Netra 240 & I've external storage (Via Store Edge S1) - However after i finished the installation I keep getting this messages on the console.
Im not sure what these messages are. If anyone can throw some lo
i keep getting these messages,
ct 13 08:01:15 C69N2 got SCSI bus reset
Oct 13 08:01:15 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd5):
Oct 13 08:01:15 C69N2 auto request sense failed (reason=reset)
Oct 13 08:01:21 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2 (glm0):
Oct 13 08:01:21 C69N2 Resetting scsi bus, got incorrect phase from (0,0)
Oct 13 08:01:21 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2 (glm0):
Oct 13 08:01:21 C69N2 got SCSI bus reset
Oct 13 08:01:21 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd5):
Oct 13 08:01:21 C69N2 auto request sense failed (reason=reset)
Oct 13 08:01:24 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd5):
Oct 13 08:01:24 C69N2 drive offline
Oct 13 08:01:24 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd5):
Oct 13 08:01:24 C69N2 i/o to invalid geometry
Oct 13 08:01:24 C69N2 md_stripe: WARNING: md: d17: write error on /dev/dsk/c1t0d0s7
Oct 13 08:01:27 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2 (glm0):
Oct 13 08:01:27 C69N2 Resetting scsi bus, got incorrect phase from (0,0)
Oct 13 08:01:27 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2 (glm0):
Oct 13 08:01:27 C69N2 got SCSI bus reset
Oct 13 08:01:27 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd5):
Oct 13 08:01:27 C69N2 auto request sense failed (reason=reset)
Oct 13 08:01:33 C69N2 scsi: WARNING: /pci@1c,600000/scsi@2 (glm0):
Oct 13 08:01:33 C69N2 Resetting scsi bus, got incorrect phase from (0,0