Infrastructure Software

Hi,

prtdiag -v failed to show environmental status on v880 running sol 9 :


System Configuration: Sun Microsystems sun4u Sun Fire 880
System clock frequency: 150 MHz
Memory size: 8192 Megabytes

========================= CPUs ===============================================

Run E$ CPU CPU
Brd CPU MHz MB Impl. Mask
--- ----- ---- ---- ------- ----
A 0 1200 8.0 US-III+ 11.0
A 2 1200 8.0 US-III+ 11.0

========================= Memory Configuration ===============================

Logical Logical Logical
MC Bank Bank Bank DIMM Interleave Interleaved
Brd ID num size Status Size Factor with
---- --- ---- ------ ----------- ------ ---------- -----------
A 0 0 1024MB no_status 512MB 8-way 0
A 0 1 1024MB no_status 512MB 8-way 0
A 0 2 1024MB no_status 512MB 8-way 0
A 0 3 1024MB no_status 512MB 8-way 0
A 2 0 1024MB no_status 512MB 8-way 0
A 2 1 1024MB no_status 512MB 8-way 0
A 2 2 1024MB no_status 512MB 8-way 0
A 2 3 1024MB no_status 512MB 8-way 0

========================= IO Cards =========================


Bus Max
IO Port Bus Freq Bus Dev,
Brd Type ID Side Slot MHz Freq Func State Name l
---- ---- ---- ---- ---- ---- ---- ---- ----- -------------------------------- -
I/O PCI 8 B 1 33 33 4,0 ok SUNW,XVR-100
I/O PCI 9 A 7 66 66 2,0 ok pci-pci8086,b154.0/SUNW,qlc (scs+
I/O PCI 9 A 7 66 66 4,0 ok SUNW,qlc-pci1077,2200.1077.2.5/f+
I/O PCI 9 A 7 66 66 5,0 ok SUNW,qlc-pci1077,2200.1077.2.5/f+

No failures found in System
===========================


========================= Environmental Status =========================

failed in fill_device_array_from_id for PSVC_KEYSWITCH
Property not found
failed in fill_device_array_from_id for FSP_LED
Property not found
failed in fill_device_array_from_id for DISK
Property not found
failed in fill_device_array_from_id for FAN
Property not found
Power Supplies:
---------------

Supply Status Fan Fail Temp Fail CS Fail 3.3V 5V 12V 48V
------ ------------ -------- --------- ------- ---- -- --- ---
failed in fill_device_array_from_id for PS
Property not found

========================= HW Revisions =======================================

System PROM revisions:
----------------------
OBP 4.18.2 2005/06/30 07:53

IO ASIC revisions:
------------------
Port
Brd Model ID Status Version
---- --------------- ---- ------ -------
IB-1 unknown 8 ok 7
IB-1 unknown 9 ok 7


I stop and start picld without effect

#/etc/init.d/picld stop
#/etc/init.d/picld start

All disk led yellow lit although there is no problem disk


Please help.

thanks,