Oracle Database Discussions

Hi,

we are trying to use the Orion Calibration Tool on AIX 64 bit.

Out test.lun file looks as follows:

test1.lun:
# cat test1.lun
/dev/rhdisk3
/dev/rhdisk1
/dev/rhdisk2
/dev/rhdisk0
/dev/rhdisk4
/dev/rhdisk12
/dev/rhdisk13
/dev/rhdisk14

We issued following command:

./orion_aix_ppc64 -testname test1 -run oltp -duration 30

But in nmon and iostat we see that only the first device is used, the first in the list:

Disks: % tm_act Kbps tps Kb_read Kb_wrtn
hdisk7 0.0 0.0 0.0 0 0
hdisk5 0.0 0.0 0.0 0 0
hdisk6 0.0 0.0 0.0 0 0
hdisk8 0.0 0.0 0.0 0 0
hdisk22 0.0 0.0 0.0 0 0
hdisk10 0.0 0.0 0.0 0 0
hdisk11 0.0 0.0 0.0 0 0
hdisk69 0.0 36.4 4.5 176 0
hdisk1 0.0 0.0 0.0 0 0
hdisk2 0.0 0.0 0.0 0 0
hdisk3 62.2 24852.3 3106.5 120192 0hdisk12 0.0 0.0 0.0 0 0
hdisk13 0.0 0.0 0.0 0 0
hdisk14 0.0 0.0 0.0 0 0
hdisk4 0.0 0.0 0.0 0 0
hdisk0 0.0 0.0 0.0 0 0

Does anbody have experience with Orion under AIX ?
We tried to open a SR but the answer was that Orion is a not supported tool :-(

Any help is appreciated

Regards

Paolo