Infrastructure Software

I have installed LSI SAS HBA card(LSISAS3800X) to connect JBOD in SUN Blade 1000.(OS: Solaris 10 11/06)

And using the driver downloaded from lsi official website.
After installed driver and modified /etc/driver_aliases:
original:
mpt "pci1000,30"
mpt "pci1000,50"
mpt "pci1000,54"
mpt "pci1000,56"
mpt "pci1000,58"
mpt "pciex1000,56"
mpt "pciex1000,58"

modified:
itmpt "pci1000,30"
itmpt "pci1000,50"
itmpt "pci1000,54"
itmpt "pci1000,56"
itmpt "pci1000,58"
itmpt "pciex1000,56"
itmpt "pciex1000,58"

I can use lsiutil to see the disks on JBOD.

bash-3.00# lsiutil

LSI Logic MPT Configuration Utility, Version 1.40, September 23, 2005

1 MPT Port found

Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev
1. itmpt0 LSI Logic SAS1068 B0 105 01160100

Select a device: [1-1 or 0 to quit] 1

1. Identify firmware, BIOS, and/or FCode
2. Download firmware (update the FLASH)
4. Download/erase BIOS and/or FCode (update the FLASH)
8. Scan for devices
10. Change IOC settings (interrupt coalescing)
13. Change SAS IO Unit settings
16. Display attached devices
20. Diagnostics
21. RAID actions
22. Reset bus
23. Reset target
30. Beacon on
31. Beacon off
60. Show non-default settings
61. Restore default settings
97. Reset SAS phy
98. Reset SAS link
99. Reset port

Main menu, select an option: [1-99 or e for expert or 0 to quit] 8

SAS1068's links are down, down, down, down, 3.0 G, 3.0 G, 3.0 G, 3.0 G

B___T___L Type Vendor Product Rev SASAddress PhyNum
0 64 0 Disk SEAGATE ST336754SS 0004 5000c5000050ae3e 1
0 65 0 Disk SEAGATE ST336754SS 0004 5000c5000050b11e 2
0 66 0 Disk SEAGATE ST336754SS 0004 5000c5000050b726 3
0 67 0 Disk SEAGATE ST336754SS 0004 5000c5000050b672 4
0 75 0 EnclServ Dataon DNS 1200-01 1A49 5001636000005abe 24
0 94 0 Disk ATA ST3500641NS H 5001636000005a80 0

Main menu, select an option: [1-99 or e for expert or 0 to quit] 16

SAS1068's links are down, down, down, down, 3.0 G, 3.0 G, 3.0 G, 3.0 G

B___T SASAddress PhyNum Handle Parent Type
500605b0000c2630 0001 SAS Initiator
500605b0000c2631 0002 SAS Initiator
500605b0000c2632 0003 SAS Initiator
500605b0000c2633 0004 SAS Initiator
500605b0000c2634 0005 SAS Initiator
500605b0000c2635 0006 SAS Initiator
500605b0000c2636 0007 SAS Initiator
500605b0000c2637 0008 SAS Initiator
5001636000005abf 4 0009 0005 Edge Expander
0 94 5001636000005a80 0 000a 0009 SATA Target
0 64 5000c5000050ae3e 1 000b 0009 SAS Target
0 65 5000c5000050b11e 2 000c 0009 SAS Target
0 66 5000c5000050b726 3 000d 0009 SAS Target
0 67 5000c5000050b672 4 000e 0009 SAS Target
0 75 5001636000005abe 24 000f 0009 SAS Initiator and Target

Type NumPhys PhyNum Handle PhyNum Handle Port Speed
Adapter 8 4 0005 --> 12 0009 4 3.0
5 0005 --> 13 0009 4 3.0
6 0005 --> 14 0009 4 3.0
7 0005 --> 15 0009 4 3.0

Expander 25 0 0009 --> 0 000a 4 3.0
1 0009 --> 1 000b 4 3.0
2 0009 --> 1 000c 4 3.0
3 0009 --> 1 000d 4 3.0
4 0009 --> 1 000e 4 3.0
12 0009 --> 4 0005 4 3.0
13 0009 --> 5 0005 4 3.0
14 0009 --> 6 0005 4 3.0
15 0009 --> 7 0005 4 3.0
24 0009 --> 24 000f 4 3.0
Main menu, select an option: [1-99 or e for expert or 0 to quit]

But I can't see any disks added in /dev/rdsk/
(When I install this card in Solaris 10 11/06 on x86 machine. It works fine.)

Can anyone help?