Kernel Cage is ENABLED
807557Jun 7 2010 — edited Jun 8 2010Hi,
I have one Sun SPARC V890 server with Solaris 10 Operating System. With 16 GB RAM and 4 processor in two Boards, Each having 2 Processor and 8 GB RAM. recently server rebooted with the following error logs. After rebooting the server server is showing hardware configuration with 2 Processor and 8 GB RAM in one board, its not showing anything about second board., Its not showing any Amber LED in control panel also. pLease seethe log and help me with one solution. Thanks in advance for all.
Error Log:
Jun 6 22:33:57 appserver3 genunix: [ID 172907 kern.notice] Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Jun 6 22:33:57 appserver Use is subject to license terms.
Jun 6 22:33:57 appserver genunix: [ID 678236 kern.info] Ethernet address = 0:14:4f:47:9b:52
Jun 6 22:33:57 appserver unix: [ID 673563 kern.info] NOTICE: Kernel Cage is ENABLED
Jun 6 22:33:57 appserver unix: [ID 389951 kern.info] mem = 8388608K (0x200000000)
Jun 6 22:33:57 appserver unix: [ID 930857 kern.info] avail mem = 8378490880
Jun 6 22:33:57 appserver unix: [ID 796976 kern.notice] System booting after fatal error FATAL Sys Hardware
Jun 6 22:33:57 appserver rootnex: [ID 466748 kern.info] root nexus = Sun Fire V890
Jun 6 22:33:57 appserver rootnex: [ID 349649 kern.info] pseudo0 at root
Jun 6 22:33:57 appserver genunix: [ID 936769 kern.info] pseudo0 is /pseudo
Jun 6 22:33:57 appserver scsi: [ID 243001 kern.info] /scsi_vhci (scsi_vhci0):
Jun 6 22:33:57 appserver Auto-failback capability disabled through scsi_vhci.conf file.
Jun 6 22:33:57 appserver rootnex: [ID 349649 kern.info] scsi_vhci0 at root
Jun 6 22:33:57 appserver genunix: [ID 936769 kern.info] scsi_vhci0 is /scsi_vhci
Jun 6 22:33:57 appserver unix: [ID 758372 kern.notice] Hardware watchdog enabled
Jun 6 22:33:57 appserver rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x8 0x600000
Jun 6 22:33:57 appserver genunix: [ID 936769 kern.info] pcisch1 is /pci@8,600000
Jun 6 22:33:57 appserver qlc: [ID 139792 kern.info] Qlogic qlc(0) FCA Driver v20070212-2.19
Jun 6 22:33:57 appserver qlc: [ID 657001 kern.info] Qlogic qlc(0) WWPN=210000144f479b52 : WWNN=200000144f479b52
Jun 6 22:34:05 appserver qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(0): Loop ONLINE
Jun 6 22:34:05 appserver qlc: [ID 147575 kern.info] NOTICE: ql_power(0): qlc is powered ON
Jun 6 22:34:05 appserver qlc: [ID 694252 kern.info] NOTICE: qlc(0): Firmware version 2.1.144
Jun 6 22:34:05 appserver pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc@2, qlc0
Jun 6 22:34:05 appserver genunix: [ID 936769 kern.info] qlc0 is /pci@8,600000/SUNW,qlc@2
Jun 6 22:34:05 appserver genunix: [ID 936769 kern.info] fp3 is /pci@8,600000/SUNW,qlc@2/fp@0,0
Jun 6 22:34:10 appserver scsi: [ID 799468 kern.info] ssd18 at scsi_vhci0: name g500000e0145b9e50, bus address g500000e0145b9e50