Hello!
I am having problems with a Solaris 10 server to be able to recognize a Fujitsu disk array. I have checked and found that the HBA card appears offline, I tried to reload it and configure it but none of it have succeeded. So, I need your kind help to find a solution for this!
The following is what I have checked:
bash-3.2# fcinfo hba-port
HBA Port WWN: 21000024ff4e1b14
OS Device Name: /dev/cfg/c3
Manufacturer: QLogic Corp.
Model: QLE2562
Firmware Version: 05.04.03
FCode/BIOS Version: BIOS: 3.20; fcode: 3.19; EFI: 2.25;
Serial Number: BFD1313J88757
Driver Name: qlc
Driver Version: 20110321-3.05
Type: unknown
State: offline
Supported Speeds: 2Gb 4Gb 8Gb
Current Speed: 8Gb
Node WWN: 20000024ff4e1b14
HBA Port WWN: 21000024ff4e1b15
OS Device Name: /dev/cfg/c4
Manufacturer: QLogic Corp.
Model: QLE2562
Firmware Version: 05.04.03
FCode/BIOS Version: BIOS: 3.20; fcode: 3.19; EFI: 2.25;
Serial Number: BFD1313J88757
Driver Name: qlc
Driver Version: 20110321-3.05
Type: unknown
State: offline
Supported Speeds: 2Gb 4Gb 8Gb
Current Speed: 8Gb
Node WWN: 20000024ff4e1b15
bash-3.2#
bash-3.2# luxadm -e port
/devices/pci@400/pci@2/pci@0/pci@8/QLGC,qlc@0,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@400/pci@2/pci@0/pci@8/QLGC,qlc@0/fp@0,0:devctl NOT CONNECTED
bash-3.2#
bash-3.2# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c2 scsi-sas connected configured unknown
c2::dsk/c2t7d0 CD-ROM connected configured unknown
c3 fc connected unconfigured unknown
c4 fc connected unconfigured unknown
c5 scsi-sas connected configured unknown
c5::w5000cca05620d609,0 disk-path connected configured unknown
c6 scsi-sas connected configured unknown
c6::w5000cca0561e8fd5,0 disk-path connected configured unknown
c7 scsi-sas connected unconfigured unknown
================================ IO Devices ================================
Slot + Bus Name + Model
Status Type Path
----------------------------------------------------------------------------
/SYS/MB/NET0 PCIE network-pciex8086,10c9
/pci@400/pci@1/pci@0/pci@4/network@0
/SYS/MB/NET1 PCIE network-pciex8086,10c9
/pci@400/pci@1/pci@0/pci@4/network@0,1
/SYS/MB/PCIE0 PCIE QLGC,qlc-pciex1077,2532 QLE2562
/pci@400/pci@2/pci@0/pci@8/QLGC,qlc@0
/SYS/MB/PCIE0 PCIE QLGC,qlc-pciex1077,2532 QLE2562
/pci@400/pci@2/pci@0/pci@8/QLGC,qlc@0,1
/SYS/MB/SASHBA PCIE scsi-pciex1000,72 LSI,2008
/pci@400/pci@2/pci@0/pci@e/scsi@0
/SYS/MB/NET2 PCIE network-pciex8086,10c9
/pci@500/pci@1/pci@0/pci@5/network@0
/SYS/MB/NET3 PCIE network-pciex8086,10c9
/pci@500/pci@1/pci@0/pci@5/network@0,1
/SYS/MB/PCIE1 PCIE network-pciex108e,abcd SUNW,pcie-qgc
/pci@500/pci@2/pci@0/pci@a/network@0
/SYS/MB/PCIE1 PCIE network-pciex108e,abcd SUNW,pcie-qgc
/pci@500/pci@2/pci@0/pci@a/network@0,1
/SYS/MB/PCIE1 PCIE network-pciex108e,abcd SUNW,pcie-qgc
/pci@500/pci@2/pci@0/pci@a/network@0,2
/SYS/MB/PCIE1 PCIE network-pciex108e,abcd SUNW,pcie-qgc
/pci@500/pci@2/pci@0/pci@a/network@0,3
/SYS/RIO/VIDEO PCIX display-pci1a03,2000
/pci@400/pci@1/pci@0/pci@0/pci@0/display@0
/SYS/MB/PCIE-IO/USBPCIX usb-pciclass,0c0310
/pci@400/pci@1/pci@0/pci@b/pci@0/usb@0
/SYS/MB/PCIE-IO/USBPCIX usb-pciclass,0c0310
/pci@400/pci@1/pci@0/pci@b/pci@0/usb@0,1
/SYS/MB/PCIE-IO/USBPCIX usb-pciclass,0c0320
/pci@400/pci@1/pci@0/pci@b/pci@0/usb@0,2
bash-3.2# luxadm -e forcelip /dev/cfg/c3 #No results from this command
bash-3.2#
bash-3.2#
bash-3.2# cfgadm -c unconfigure c3
cfgadm: Configuration operation not supported
bash-3.2#
bash-3.2# cfgadm -c configure c3
bash-3.2#
bash-3.2#
bash-3.2# cat /etc/release
Oracle Solaris 10 8/11 s10s_u10wos_17b SPARC
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Assembled 23 August 2011
bash-3.2#
bash-3.2#
I will appreciate your help about this!
Best regards!