Fibre Channel Howto Guide?
807557May 16 2006 — edited May 18 2006Hi, I am new to Fibre Channel and I am having problems. I cannot get my v210's to see the fc 3510 array. The disks on the array show up on the switch fabric as Sun and wwpn numbers. The v210 is connected to the FC Switch (cisco 5428) but when I do a luxadm probe no array is seen. Similarly format shows only the local disk on the system.
I can see the qlogic HBA card and its associated driver on the v210 and I am at a loss what to do next. I need to know how to configure the HBA and Im guessing I have to add it to the Zone. So I wondered if some one could explain zones or tell me where I can find documentation to help me. Any help would be greatly appreciated. thanks.