# fcinfo hba-port -- reports "No Adapters Found."
Problem Description
---------------------------------------------------
Recently been trying to install a new "driver" for EMC XtremIO storage array, hence updated /etc/driver/drv/scsi_vhci.conf, and performed stmsboot -u (and reboot) to recognize multi-pathing on these XtremeIO devices. Unfortunately, after reboot the "Qlogic HBA" FC adapters went missing.
# fcinfo hba-port
No Adapters Found.
In "/var/adm/messages" file:
Oct 5 12:34:33 txslm2mperf01 fcip: [ID 950693 kern.warning] WARNING: fcip(11): port attach failed: soft state alloc failed
Oct 5 12:34:33 txslm2mperf01 fctl: [ID 626979 kern.info] NOTICE: fctl(11): attach failed for SunFC FCIP v1.61
Oct 5 12:34:43 txslm2mperf01 fcip: [ID 842839 kern.info] NOTICE: fcip(21): port attach failed
Oct 5 12:34:43 txslm2mperf01 fctl: [ID 626979 kern.info] NOTICE: fctl(21): attach failed for SunFC FCIP v1.61
Oct 5 12:34:53 txslm2mperf01 fcip: [ID 842839 kern.info] NOTICE: fcip(10): port attach failed
Oct 5 12:34:53 txslm2mperf01 fctl: [ID 626979 kern.info] NOTICE: fctl(10): attach failed for SunFC FCIP v1.61
Oct 5 12:35:03 txslm2mperf01 fcip: [ID 842839 kern.info] NOTICE: fcip(17): port attach failed
Oct 5 12:35:03 txslm2mperf01 fctl: [ID 626979 kern.info] NOTICE: fctl(17): attach failed for SunFC FCIP v1.61
..
.
Oct 5 12:35:43 txslm2mperf01 fctl: [ID 626979 kern.info] NOTICE: fctl(8): attach failed for SunFC FCIP v1.61
Oct 5 12:35:43 txslm2mperf01 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Oct 5 12:35:43 txslm2mperf01 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
And the following messages which used to appear (before last stmsboot -u reboot), NO LONGER APPEAR/now-GONE ..:
Oct 5 12:01:23 txslm2mperf01 fcsm: [ID 517869 kern.info] NOTICE: fcsm(8): attached to path /pci@340/pci@1/pci@0/pci@c/SUNW,qlc@0/fp@0,0
Oct 5 12:01:23 txslm2mperf01 fcsm: [ID 517869 kern.info] NOTICE: fcsm(17): attached to path /pci@3c0/pci@1/pci@0/pci@e/SUNW,qlc@0,1/fp@0,0
..
Followed Doc ID 1426095.1 & attempt to load " modload -p drv/sparcv9/fcsm" and "devfsadm -i fcsm"
Still getting the same ERROR!