Infrastructure Software

We were booting a T4-4 server from a Solaris 10 boot ISO and command I used was "boot rcdrom - install as nowin" (i was mounting the ISO using the serial redirection window etc, hence the rcdrom)

It worked great asking for the" language to be installed" and "network setting and etc."

then it starts communicating with the jump server to pick up the jumpstart script and etc still working great. but when it start to install, it returned with "ERROR no disk found"

I am sure there are two 600G disk on the server. not sure why it think there is no disk during the installation. googled it and some said something related to raid and i cannot get a conclusion.

{0} ok show-disks
a) /pci@700/pci@1/pci@0/pci@0/LSI,sas@0/disk
b) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
c) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
d) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
e) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk


{0} ok devalias
screen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
mouse /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/mouse@1
keyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/keyboard@0
disk7 /pci@700/pci@1/pci@0/pci@0/@0/disk@p3
disk6 /pci@700/pci@1/pci@0/pci@0/@0/disk@p2
disk5 /pci@700/pci@1/pci@0/pci@0/@0/disk@p1
disk4 /pci@700/pci@1/pci@0/pci@0/@0/disk@p0
scsi1 /pci@700/pci@1/pci@0/pci@0/@0
net3 /pci@600/pci@2/pci@0/pci@3/network@0,1
net2 /pci@600/pci@2/pci@0/pci@3/network@0
rcdrom /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0
rkeyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@4/keyboard@0
rscreen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0:r1280x1024x60
net1 /pci@400/pci@1/pci@0/pci@2/network@0,1
net0 /pci@400/pci@1/pci@0/pci@2/network@0
net /pci@400/pci@1/pci@0/pci@2/network@0
disk3 /pci@400/pci@1/pci@0/pci@0/@0/disk@p3
disk2 /pci@400/pci@1/pci@0/pci@0/@0/disk@p2
disk1 /pci@400/pci@1/pci@0/pci@0/@0/disk@p1
disk0 /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
disk /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
scsi0 /pci@400/pci@1/pci@0/pci@0/@0
scsi /pci@400/pci@1/pci@0/pci@0/@0
virtual-console /virtual-devices@100/console@1

name aliases
{0} ok select scsi0
{0} ok show-children

FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00

Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1

f) /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk
g) /pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk
h) /iscsi-hba/disk
q) NO SELECTION

{0} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y

FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00

Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1

{0} ok show-volumes
No volumes to show
{0} ok