CPU temperature is too high in Solaris 10 sun fire v890 machine
807557Mar 1 2008 — edited Mar 6 2008Hi,
I just installed Solaris 10 on a sun fire v890 machine. I used the prtdiag -v command to check the system.
However, It appears to me that the CPU temperatures is higher than the temperature range specified in the technical specification. The server is a standalone node that does not connect to the network or process anything.
Is it a problem? Thank you.
========================= Environmental Status =========================
System Temperatures (Celsius):
-------------------------------
Device Temperature Status
---------------------------------------
CPU0 77 OK
CPU1 76 OK
CPU2 77 OK
CPU3 74 OK
MB 28 OK
IOB 24 OK
DBP0 23 OK
------------------------------------------------------------------------------------------------------------------------------
Environmental
AC power 200-240 VAC, 47-63 Hz, 2078 VA
Operating temperature
* 5� C to 35� C (41� F to 95� F), 20% to 80% relative humidity, non condensing, 27� C max. wet bulb
* 2.1 GHz UltraSPARC IV+ processor: ASHRAE Class 3 (35C/900m) and/or 28C/10kft
Non operating temperature -20� C to 60� C (-4� F to 140� F), 95% at 40� C relative humidity, non condensing
Regards,
Ryan