Infrastructure Software

Hi Folks, I am pretty new to this forum and solaris so please have some patience :)

Any way I got this testmachine I have installed Solaris 10 on. Its a IBM ThinkCenter A52 (8084-7DG). My problem is that the network card is not detected automaticly. No problems with the CDE no starting or something like that. Installed from a DVD.

I have tried running ifconfig -a / plumb, I tried checking for new devices with devfsadm -v. Ive also tried running the command for sys-unconfig. No go

Most recently I have been examining the output from running prtconf -pv/Dv. The network device is there on the PCI-bus but no driver is loaded.

Node 0x000013
assigned-addresses: 82034010.00000000.e8100000.00000000.00001000.81034014.00000000.00002000.00000000.00000040
reg: 00034000.00000000.00000000.00000000.00000000.02034010.00000000.00000000.00000000.00001000.01034014.00000000.00000000.00000000.00000040
compatible: 'pci8086,1050.1014.2c7.2' + 'pci8086,1050.1014.2c7' + 'pci1014,2c7' + 'pci8086,1050.2' + 'pci8086,1050' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000038
min-grant: 00000008
subsystem-vendor-id: 00001014
subsystem-id: 000002c7
unit-address: '8'
class-code: 00020000
revision-id: 00000002
vendor-id: 00008086
device-id: 00001050
name: 'pci1014,2c7'

So, the card is some sort of Intel Chipset a Intel 10/100 motherboard/onboard. Ive tried looking through the detailed specs from IBM on what kind of card/chipset it is. All it tells me is a Intel Pro 10/100 something.

So can anyone give me a hint of which direction I should be heading for installing the correct drive?

With Regards
Oscar